Skip Ribbon Commands
Skip to main content



The reverse rinsing filters ensure a continuous supply of filtered water...

Product Description

The reverse rinsing filters ensure a continuous supply of filtered water. The fine filter prevents the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion. 

The fine filters are used in systems where an existing pressure reducing valve is fitted or where one is not required. Both horizontal and vertical installation is possible. 

Technical Properties

  • DVGW (approval for all filters with 100 micron mesh sizes and with rotatable connection piece)
Medium type drinking water
DN size 40 mm
Port diameter 1 1/2 inch
Mounting position horizontal or vertical
Flow capacity Kvs 16 m3/h
Body material leadfree brass
Filter mesh 100 micron
Filter type reverse rinsing
Reverse rinsing with filtered water Yes
Additional Descriptions

Max. inlet pressure: 16 bar; for long term 12 bar to maintain the measuring accuracy of the pressure gauge

  • Filtered water supplied even during reverse rinsing
  • Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water
  • Memory ring indicates time when next reverse rinsing is due
  • Automatic reverse rinsing actuator with bayonet connector can be retrofitted
  • Large filter surface
  • Shock resistant clear synthetic material filter bowl enables easy checking of filter contamination
  • Filter insert fully replaceable
  • ACS certified
  • All materials are KTW approved
  • All materials are UBA conform
  • Approved by TUEV LGA for low noise, Group 1 without limitations
Pressure range 1,5 ... 16 bar
Media temp. 5 ... 30 oC
Maximum inlet pressure 16 / 12 bar
Connection diameter 11/2 - 2 inch