Product Description
According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
Technical Properties
| Approvals |
|
| Media |
Compressed air, oil free compressed air and nitrogen in consideration of valid standards (e.g. EN 12502) |
| Medium type |
drinking water |
| DN size |
50 mm |
| Port connection |
flanges |
| Nominal pressure |
PN16 |
| Outlet pressure |
1.5 ... 8 bar |
| Flow capacity Kvs |
28 |
| Body material |
cast iron GG25 |
| Body finishing |
powder coating |
| Spring bonnet material |
ductile cast iron |
| Balanced seat design |
Yes |
| Additional Descriptions |
- Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
- Non-rising stem for setting outlet pressure and position indicator on spring bonnet (except for DN200)
- The adjustment spring is not in contact with the potable water
- With inlet and outlet pressure gauge
- Powder coated inside and outside - Powder used is physiologically and toxicologically safe
|
| Port diameter |
2 inch |
| Maximum inlet pressure |
16 bar |
| Minimum pressure drop |
1 bar |
| Max. media temperature |
65 oC |
