Product Description
Microprocessor controller with fixed hard- and software. Configuration with 15 sets of parameters. Remote access with App and Gateway.
For all Heating and District Heating applications with:
- direct heating circuit and/or mixed heating circuit(s)
- boiler burner
- domestic hot water
- heat exchanger valve
Technical Properties
| Control software |
the software application can be selected, by keying in a planttype code, and can be adjusted with parameters; or use no code number and configure the application with the parametersets only |
| Heating circuit |
1x: mixing valve + pump; pump |
| Modes of operation |
heating without time program, eco, summer, manu, auto |
| Domestic Hot Water |
loading pump |
| Time program |
heating with own week clock, DHW with own week clock, 15 vacation periods |
| Burner output |
1/2 stages |
| Hardware outputs |
all outputs are relay outputs with a maximum contact load of 2A 250V - the standard relay outputs are for pumps and valves, and are controlled from the selected application; mixing valves need 2 output relays
- the function for the additional relay outputs can be set with parameters
|
| Hardware inputs |
6 (SDC 1v DHC 3v) |
| Applicable sensor types |
NTC 20 kohm |
| Bus system description |
- Honeywell Home bus sytem for max. 5 SMILE controllers, and 3 setpoint units per controller; max. buslength 100 m; the controller can also be used as stand-alone controller.
- OpenTherm for all models, except SDC3-40..
|
| Protection class |
IP30 |
| Max. ambient temperature |
50 oC |
| ErP Class |
VI |
| Power supply |
230 Vac | 5.8 VA |
| Batteries |
included 3VLi |
| Additional Descriptions |
One of the hardware inputs is for a pulse contact. This can be used for example for counting running hours. With parametersettings the amount of counted pulses can be used for switching pumps or boilers. |
