Skip Ribbon Commands
Skip to main content
​This extension for Google Chrome will allow you to click on the links in the PDF CAD files and open the related documents from your browser.

Braukmann Retrofit filter combination with pressure reducing valve and reverse rinsing fine filter, FKN74CS

Braukmann Retrofit filter combination with pressure reducing valve and reverse rinsing fine filter, FKN74CS

The filter combinations comprise reverse rinsing filter and pressure reducing valve in one appliance. They ensure a continuous supply of filtered w...

Product Description

The filter combinations comprise reverse rinsing filter and pressure reducing valve in one appliance.

They ensure a continuous supply of filtered water. The fine filter stops the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion. The pressure reducing valve prevents pressure damage and reduces water consumption. The filter combinations are fitted in systems where a pressure reducing valve is required. Both horizontal and vertical installation is possible.

Technical Properties

Approvals
  • DVGW (mesh size 100 micron and with rotatable connection piece)
Media

Drinking water

Mounting position horizontal or vertical
Outlet pressure 1,5 ... 6 bar
Flow capacity Kvs 6,2 m3/h
Body material synthetic material
Spring bonnet material synthetic material
Transparant strainer chamber Yes
Balanced seat design Yes
Reverse rinsing with filtered water Yes
Additional Descriptions
  • Integral pressure reducing valve with balanced seat
  • Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
  • Filtered water supplied even during reverse rinsing
  • Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water
  • Memory ring indicates time when next reverse rinsing is due
  • Automatic reverse rinsing actuator with bayonet connector can be retrofitted
  • Large filter surface
  • Shock resistant clear synthetic material filter bowl - enables easy checking of filter contamination
  • Filter insert fully replaceable
  • Standardised discharge connection
  • All materials are ACS approved
  • All materials are KTW approved
  • Approved by TUEV LGA for low noise, Group 1 without limitations
Pressure range 1,5 ... 16 bar
Media temp. 5 ... 30 oC
Maximum inlet pressure 16/12 bar

Certifications and Awards

Tuotteet

Product Type DN size
Port diameter
Flow capacity Kvs
Filter mesh
Body material
Retrofit version without rotatable connector piece, filter mesh size 100 micron

FKN74CS-1A
25 mm 1 inch 6,2 100 micron brass
Retrofit version without rotatable connector piece, filter mesh size 50 micron

FKN74CS-1C
25 mm 1 inch 6,2 50 micron brass

Accessories and replacement parts

Accessories

Image Description Product Type Downloads
Connection set, Solder connections for size 1 1/4" VST06-11/4B  
Connection set, Solder connections for size 3/4" VST06-3/4B  
Connection set, Solder connections for size 1" VST06-1B  
Double ring wrench for removing the filter bowl, 1/2" + 11/4" ZR74CS  
Rotatable connector piece, 1/2" DA74CS-1/2A  
Rotatable connector piece, 3/4" DA74C-3/4A  
Rotatable connector piece, 1" DA74C-1A  
Rotatable connector piece, 11/4" DA74C-11/4A  
Automatic reverse rinsing actuator, 1/2" - 11/4" Z74S-AN  

Spare Parts

Image Description Product Type Downloads
Union seal washer (10 pcs.) for size 3/4" 0901444  
Union seal washer (10 pcs.) for size 1" 0901445  
Union seal washer (10 pcs.) for size 1 1/4" 0901446  
Flange seal, 3/4" - 11/4" 5975900  
Connection set threaded connection for size 1 1/4" VST06-11/4A  
Connection set threaded connection for size 1/2" VST06-1/2A  
Connection set threaded connection for size 3/4" VST06-3/4A  
Connection set threaded connection for size 1" VST06-1A  
Valve cartridge complete (without filter) for sizes 1" + 1 1/4" D06FA-1B  
Filter insert complete, filter mesh size 100 micron, 1/2" - 11/4" AF74-1A  
Filter insert complete, filter mesh size 50 micron, 1/2" - 11/4" AF74-1C  
Filter insert complete, filter mesh size 200 micron, 1/2" - 11/4" AF74-1D  
Clear filter bowl, 1/2" - 11/4" KF74CS-1A  
Pressure gauge, rear connection thread G1/4", Range:0 - 16 bar M74CS-A16