Skip Ribbon Commands
Skip to main content

D15NP-50A

D15NP-50A

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial...

Product Description

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation. 

Technical Properties

Media

Compressed air, oil free compressed air and nitrogen in consideration of valid standards (e.g. EN12502)

Medium type drinking water
DN size 50 mm
Port connection flanges
Nominal pressure PN16
Outlet pressure 0,2 ... 2 bar
Flow capacity Kvs 28
Body material cast iron GG25
Body finishing powder coating
Spring bonnet material ductile cast iron
Additional Descriptions
  • Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
  • Non-rising stem for setting outlet pressure and position indicator on spring bonnet (except for DN200)
  • The adjustment spring is not in contact with the drinking water
  • With inlet and outlet pressure gauge (DN80- DN150) or with outlet pressure gauge (DN50, DN65, DN200)
  • Powder coated inside and outside - Powder used is physiologically and toxicologically safe
  • All materials are ACS approved
Port diameter 2 inch
Maximum inlet pressure 16 bar
Minimum pressure drop 0,5 bar
Max. media temperature 65 oC