Skip Ribbon Commands
Skip to main content

Reverse rinsing fine filter, F76S

Reverse rinsing fine filter, F76S

Product Description

F76S reverse rinsing filters ensure a continuous supply of filtered water. The fine filter prevents the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion. The appliances correspond to the requirements of current DIN/DVGW specifications.

Technical Properties

Approvals
  • DVGW (mesh size 100 micron)
  • SVGW (mesh size 100 micron)


Medium type drinking water
Mounting position horizontal
Body material brass, dezincification resistant
Filter mesh 100 micron
Filter type reverse rinsing
Reverse rinsing with filtered water Yes
Additional Descriptions
  • Double Spin Technology for connection sizes 1/2" to 11/4" - Cartridge with external rotor enabling simultaneous  cleaning in lower and upper filter areas - Visual function check possible
  • Filtered water supplied even during reverse rinsing
  • Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water
  • Memory ring indicates when next manual reverse rinsing is due
  • Automatic reverse rinsing actuator with bayonet connector can be retrofitted
  • Large filter surface
  • Shock resistant claer synthetic material filter bowl enables easy checking of filter contamination
  • Filter and compete filter bowl are replaceable
  • Also available without connections
  • Standardised discharge connection
  • All materials are ACS approved
  • All materials are KTW approved
  • Approved by TUEV LGA for low noise, Group 1 without limitations

Certifications and Awards

Related Material

Products

Product Type DN size
Port connection
Port diameter
Max. media temperature
Flow capacity Kvs
Transparant strainer chamber
Pressure range
Threaded male connections, filter mesh size 100 micron

F76S-1/2AA
15 mm external threads 1/2 inch 40 oC 4.8 1.5 ... 16 bar

F76S-3/4AA
20 mm external threads 3/4 inch 40 oC 7.2 1.5 ... 16 bar

F76S-1AA
25 mm external threads 1 inch 40 oC 9.8 1.5 ... 16 bar

F76S-11/4AA
32 mm external threads 1 1/4 inch 40 oC 10.7 1.5 ... 16 bar

F76S-11/2AA
40 mm external threads 1 1/2 inch 40 oC 21 1.5 ... 16 bar

F76S-2AA
50 mm external threads 2 inch 40 oC 22 1.5 ... 16 bar
Threaded male connections, red-bronze filter bowl, filter mesh size 100 micron

F76S-1/2AAM
15 mm external threads 1/2 inch 70 oC 4.8 - 1.5 ... 25 bar

F76S-3/4AAM
20 mm external threads 3/4 inch 70 oC 7.2 - 1.5 ... 25 bar

F76S-1AAM
25 mm external threads 1 inch 70 oC 9.8 - 1.5 ... 25 bar

F76S-11/4AAM
32 mm external threads 1 1/4 inch 70 oC 10.7 - 1.5 ... 25 bar

F76S-11/2AAM
40 mm external threads 1 1/2 inch 70 oC 21 - 1.5 ... 25 bar

F76S-2AAM
50 mm external threads 2 inch 70 oC 22 - 1.5 ... 25 bar
Without connections, filter mesh size 100 micron

F76S-3/4EA
20 mm 3/4 inch 40 oC 7.2 1.5 ... 16 bar

F76S-1EA
25 mm 1 inch 40 oC 9.8 1.5 ... 16 bar

F76S-11/4EA
32 mm 1 1/4 inch 40 oC 10.7 1.5 ... 16 bar

F76S-11/2EA
40 mm 1 1/2 inch 40 oC 21 1.5 ... 16 bar

F76S-2EA
50 mm 2 inch 40 oC 22 1.5 ... 16 bar

Accessories and replacement parts

Accessories

Image Description Product Type Downloads
Red-bronze filter bowl for sizes 1/2" - 1 1/4" FT09RS-1A  
Red-bronze filter bowl for sizes 1/2" - 2" FT09RS-11/2A  
Double ring wrench for removing the filter bowl (no fig.) for sizes 1 1/2" - 2" ZR10K-11/2  
Double ring wrench for removing the filter bowl (no fig.) for sizes 1" - 1 1/4" ZR10K-1  
Double ring wrench for removing the filter bowl for sizes 1/2" + 3/4" ZR10K-1/2  
Automatic reverse rinsing actuator for automatic filter cleaning at presettable intervals, 230 V, 50/60 Hz, 10 W, with moulded Schuko electrical plug Z11S-A  
Automatic reverse rinsing actuator for automatic filter cleaning at presettable intervals, 24 V, 50/60 Hz, 10 W, without electrical plug Z11S-B  
Automatic reverse rinsing actuator for automatic filter cleaning at presettable intervals, 230 V, 50/60 Hz, 10 W, with moulded Type 12 electrical plug for Switzerland Z11S-Z  
Connection set with solder connections for size 1/2" VST06-1/2B  
Connection set with solder connections for size 1 1/4" VST06-11/4B  
Connection set with solder connections for size 1 1/2" VST06-11/2B  
Connection set with solder connections for size 2" VST06-2B  
Connection set with solder connections for size 3/4" VST06-3/4B  
Connection set with solder connections for size 1" VST06-1B  
Differential pressure switch for sizes DN65/80/100 DDS76-1  
Differential pressure switch for sizes R 1/2 + R 3/4 DDS76-1/2  
Differential pressure switch for sizes R 1 1/2 + R 2 DDS76-11/2  

Spare Parts

Image Description Product Type Downloads
Union seal washer (10 pcs.) for size 3/4" 0901444  
Union seal washer (10 pcs.) for size 1" 0901445  
Union seal washer (10 pcs.) for size 1 1/4" 0901446  
Union seal washer(10 pieces), 1 1/2" 0901447  
Union seal washer(10 pieces), 2" 0901448  
O-ring set (10 pcs.) for sizes 1/2" + 1 1/4" 0900747  
O-ring set (10 pcs.) for sizes 1 1/2" + 2" 0900748  
Spring for sizes 3/4" - 1 1/4" 2074900  
Spring for sizes 1 1/2" - 2" 2159400  
Connection set with threaded connections for size 1 1/4" VST06-11/4A  
Connection set with threaded connections for size 1/2" VST06-1/2A  
Connection set with threaded connections for size 1 1/2" VST06-11/2A  
Connection set with threaded connections for size 2" VST06-2A  
Connection set with threaded connections for size 3/4" VST06-3/4A  
Connection set with threaded connections for size 1" VST06-1A  
Pressure gauge with housing diameter 50 mm, connection thread G 1/4, range 0 - 16 bar M76K-A16  
Filter insert complete, filter mesh size 100 micron, for sizes 1/2" - 3/4" AF11S-1/2A  
Filter insert complete, filter mesh size 100 micron, for sizes 1" - 1 1/4" AF11S-1A  
Filter insert complete, filter mesh size 100 micron, for sizes 1 1/2" - 2" AF11S-11/2A  
Filter insert complete for filters with Double Spin Technology, filter mesh size 100 micron, for sizes 1/2" - 3/4" AF11DS-1/2A  
Filter insert complete for filters with Double Spin Technology, filter mesh size 100 micron, for sizes 1" - 1 1/4" AF11DS-1A  
Clear filter bowl for sizes 1/2" - 1 1/4" KF11S-1A  
Clear filter bowl for sizes 1 1/2" - 2" KF11S-11/2A  
Red-bronze filter bowl for sizes 1/2" - 1 1/4" FT09RS-1A  
Red-bronze filter bowl for sizes 1/2" - 2" FT09RS-11/2A  
Ball valve complete for sizes 1/2" - 2" KH11S-1A  
Drain connector for sizes 1/2" - 2" AA76-1/2A