Skip Ribbon Commands
Skip to main content

D06F-1/2LFA

D06F-1/2LFA

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply...

Product Description

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation. 

Technical Properties

Approvals
  • DVGW
  • SINTEF
  • VA (ETA)
Medium type drinking water
DN size 15 mm
Connection Inlet/Outlet conn. set, ext. thread
Nominal pressure PN16
Outlet pressure 1,5 ... 6 bar
Max. operating temp. 40C
Flow capacity Kvs 2,4
Body material leadfree brass
Spring bonnet material synthetic material
Filter mesh 0,16 mm
Filter bowl clear
Setpoint scale Yes
Balanced seat design Yes
Additional Descriptions
  • Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
  • Up to size 1 1/4" approved by LGA for low noise, Group 1 without limitations
  • The valve insert is of high quality synthetic material and can be fully exchanged
  • The outlet pressure is set by turning the adjustment knob
  • The set pressure is directly indicated on the set point scale
  • The adjustment spring is not in contact with the drinking water
  • Integral fine filter
  • Easily retrofittable to convert valve to a reverse-rinsing filter combination
  • Can be retrofitted with an inlet check valve
  • All materials are UBA conform
Port diameter 1/2 inch
Maximum inlet pressure 16 bar