Product Description
The filter combinations comprise reverse rinsing filter and pressure reducing valve in one appliance. They ensure a continuous supply of filtered water. The fine filter stops the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion. The pressure reducing valve prevents pressure damage and reduces water consumption. The filter combinations are fitted in systems where a pressure reducing valve is required. Both horizontal and vertical installation is possible.
Technical Properties
| Approvals |
- DVGW (mesh size 100 micron and with rotatable connection piece)
|
| Media |
Drinking water |
| Port connection |
external threads |
| Mounting position |
horizontal or vertical |
| Outlet pressure |
1.5 ... 6 bar |
| Body material |
synthetic material |
| Spring bonnet material |
synthetic material |
| Transparant strainer chamber |
Yes |
| Balanced seat design |
Yes |
| Filter type |
reverse rinsing |
| Reverse rinsing with filtered water |
Yes |
| Additional Descriptions |
- Integral pressure reducing valve with balanced seat
- Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
- Filtered water supplied even during reverse rinsing
- Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water
- Memory ring indicates time when next reverse rinsing is due
- Automatic reverse rinsing actuator with bayonet connector can be retrofitted
- Large filter surface
- Shock resistant clear synthetic material filter bowl - enables easy checking of filter contamination
- Filter insert fully replaceable
- Standardized discharge connection
- All materials are ACS approved
- All materials are KTW approved
- Approved by TUEV LGA for low noise, Group 1 without limitations
|
| Pressure range |
1.5 ... 16 bar |
| Media temp. |
5 ... 30 oC |
| Maximum inlet pressure |
16/ 12 bar |
