Product Description
The reverse rinsing filters ensure a continuous supply of filtered water. The fine filter prevents the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion.
The fine filters are used in systems where an existing pressure reducing valve is fitted or where one is not required. Both horizontal and vertical installation is possible.
Technical Properties
| Approvals |
- DVGW (mesh size 100 and with rotatable connection piece)
|
| Media |
Water |
| DN size |
25 mm |
| Port diameter |
1 inch |
| Mounting position |
horizontal or vertical |
| Flow capacity Kvs |
9 m3/h |
| Body material |
brass |
| Filter mesh |
100 micron |
| Transparant strainer chamber |
Yes |
| Reverse rinsing with filtered water |
Yes |
| Additional Descriptions |
- Filtered water supplied even during reverse rinsing
- Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water
- Memory ring indicates time when next reverse rinsing is due
- Automatic reverse rinsing actuator with bayonet connector can be retrofitted
- Large filter surface
- Shock resistant clear synthetic material filter bowl enables easy checking of filter contamination
- Filter insert fully replaceable
- All materials are ACS approved
- All materials are KTW approved
- Approved by TUEV LGA for low noise, Group 1 without limitations
|
| Pressure range |
1,5 ... 16 bar |
| Media temp. |
5 ... 30 oC |
| Maximum inlet pressure |
16/12 bar |
