Skip Ribbon Commands
Skip to main content

Braukmann High pressure pattern Diaphragm-actuated Pressure Reducing Valve with cartridge insert, D15SH

Braukmann High pressure pattern Diaphragm-actuated Pressure Reducing Valve with cartridge insert, D15SH

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply...

Product Description

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply.

They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation. 

Technical Properties

Medium type drinking water
Port connection flanges
Nominal pressure PN25
Outlet pressure 3 ... 10 bar
Max. media temperature 65 oC
Body material ductile cast iron
Body finishing powder coating
Spring bonnet material ductile cast iron
Balanced seat design Yes
Maximum inlet pressure 25 bar
Minimum pressure drop 1 bar

Certifications and Awards

Продукти

Product Type DN size
Port diameter
Flow capacity Kvs
PN25, ISO 7005-2, EN 1092-2, face to face length acc. EN 558-1

D15SH-50B
50 mm 2 inch 18

D15SH-65B
65 mm 21/2 inch 49

D15SH-80B
80 mm 3 inch 51

D15SH-100B
100 mm 4 inch 56

Accessories and replacement parts

Spare Parts

Image Description Product Type Downloads
Pressure gauge, ranges 0 - 16 bar M39M-A16  
Pressure gauge, ranges 0 - 25 bar M39M-A25  
Valve insert complete for sizes DN50 0904175  
Set of seals complete for sizes DN50 0904176  
Valve insert complete DN65-100 as of 03/2020 0904220  
Set of seals complete for sizes DN65, DN80, DN100 0904221  

Accessories

Image Description Product Type Downloads
Extension flange DN125 Adapter flanges DN100 to DN125. Ductile iron, PN16 acc. ISO 7005-2 and EN1092-2. Overall length with adapter flanges (without bolts) DN125 L=416mm, DVGW approved, including bolts and nuts. EXF125-A