Skip Ribbon Commands
Skip to main content

Pressure regulator, DR300

Pressure regulator, DR300

Pressure regulators of this type protect downstream installations against excessive supply pressure. Pressure regulators are used when the capacity...

Product Description

Pressure regulators of this type protect downstream installations against excessive supply pressure. Pressure regulators are used when the capacity of direct controlled pressure reducing valves are insufficient. Their compact construction makes them particularly suitable for installation in limited spaces, for example in ducts. By using a pressure regulator, pressurization damage is avoided and water consumption reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation. 

Technical Properties

Approvals
  • DVGW
  • WRAS (up to 23 C)
Media

Drinking water 

Port connection flanges ISO7005
Minimum inlet pressure 0,5 bar
Outlet pressure 3 ... 15/19 bar
Max. media temperature 80 oC
Body material spherulitic cast iron GGG40
Body finishing powder coating
Additional Descriptions
  • High precision control during pressure variances and low flow rates 
  • High flow capacity
  • High control accuracy
  • Powder-coated inside and outside - Powder used is physiologically and toxicologically safe
  • Integral control circuit and ball valves
  • No external energy required for operation
  • Conforms to BSEN 1567
Minimum pressure drop 0,1 bar
Preset Outlet Pressure 4 bar

Certifications and Awards

Продукти

Product Type DN size
Nominal pressure
Flow capacity Kvs
Maximum inlet pressure
Flanges, PN 16, ISO 7005-2, EN 1092-2

DR300-50A
50 mm PN16 43 16 bar

DR300-65A
65 mm PN16 43 16 bar

DR300-80A
80 mm PN16 103 16 bar

DR300-100A
100 mm PN16 167 16 bar

DR300-150A
150 mm PN16 407 16 bar

DR300-200A
200 mm PN16 676 16 bar

DR300-250A
250 mm PN16 1160 16 bar

DR300-300A
300 mm PN16 1600 16 bar

DR300-350A
350 mm PN16 2000 16 bar

DR300-400A
400 mm PN16 3000 16 bar

DR300-450A
450 mm PN16 3150 16 bar
Flanges, PN 25, ISO 7005-2, EN 1092-2

DR300-50B
50 mm PN25 43 25 bar

DR300-65B
65 mm PN25 43 25 bar

DR300-80B
80 mm PN25 103 25 bar

DR300-100B
100 mm PN25 167 25 bar

DR300-150B
150 mm PN25 407 25 bar

DR300-200B
200 mm PN25 676 25 bar

DR300-250B
250 mm PN25 1160 25 bar

DR300-300B
300 mm PN25 1600 25 bar

DR300-350B
350 mm PN25 2000 25 bar

DR300-400B
400 mm PN25 3000 25 bar

DR300-450B
450 mm PN25 3150 25 bar

Accessories and replacement parts

Accessories

Image Description Product Type Downloads
Extension flange DN125 Adapter flanges DN100 to DN125 Ductile iron, PN16 acc. ISO 7005-2 and EN 1092-2. Overall length with adapter flanges (without bolts) DN125 L=416mm, DVGW approved, including bolts and nuts and the seal disc. EXF125-A  

Spare Parts

Image Description Product Type Downloads
Seal set for DN 50 0903750  
Seal set for DN 65 0903751  
Seal set for DN 80 0903752  
Seal set for DN 100 0903753  
Seal set for DN 150 0903754  
Seal set for DN 200 0903755  
Seal set for DN 250 0903756  
Seal set for DN 300 0903757  
Seal set for DN 350 0903758  
Seal set for DN 400 0903759  
Seal set for DN 450 0903760  
Replacement pilot valve for sizes DN 50 - DN 450 CX-PR  
Pressure gauge with housing diameter 50 mm, connection thread G 1/4, range 0 - 16 bar M07M-A16