Skip Ribbon Commands
Skip to main content

Six way ball valve, change-over, PN16, DN15-20, VBG6

Six way ball valve, change-over, PN16, DN15-20, VBG6

VBG6 6-way ball valves, are designed as change-over valve to connect a 2-pipe heat exchanger (Fan-coil Unit or Ceiling)...

Product Description

VBG6 6-way ball valves, are designed as change-over valve to connect a 2-pipe heat exchanger (Fan-coil Unit or Ceiling) to a 4-pipe system, ideally together with the Kombi-FCU Pressure Independent Control Valve used for dynamic balancing.


The simultaneous rotation of two balls, mechanically connected to one stem, opens supply and return on one side (e.g. cooling) and closes at the same time the other side (heating). That avoids any mixing between the flows, and reduces potential energy losses. VBG6 valves are designed to be actuated by a MR6 rotary valve actuator (on/off or modulating). Position feedback on the modulating actuator can be used for remote system monitoring and system check. 

Technical Properties

Medium type water or water-glycol mixture according to VDI 2035
Media temp. 2 ... 110 oC
Nominal pressure PN16
Angle of rotation 90 o
Materials

body brass, inner parts brass 

Port connection ext. thread flat sealing
Packing

EPDM, PTFE, FKM  

Additional Descriptions

VBG6 valves are delivered with a flow limiter kit in the valve box. This gives flexibility in the flow rate adjustment. During installation, the used Kv value should be written on the label stripped on the valve neck. 

Close off 200 kPa
Connection diameter G 3/4 inch

Продукти

Product Type DN size
Kvs value
Products

VBG6-15
15 mm 1,25

VBG6-20
20 mm 2,8

VBG6-20HF
20 mm 4

Accessories and replacement parts

Accessories

Image Description Product Type Downloads
Soldering fitting for DN20 valve, pipe size 15 mm AC-20FS  
External threaded fitting for DN20 valve, pipe size 1/2" AC-20FT  
Connection Set with threaded connection (consisting of 1 union nut, 1 tailpiece and 1 gasket)DN15, G3/4", R1/2" ACS-15T  
Connection Set with welding connection (consisting of 1 union nut, 1 tailpiece and 1 gasket)DN15, G3/4", R1/2" ACS-15W  
Fastening base for VBG6 VBG6-063ZA  
Insulation shell for DN15 type VBG6-063GI-15  
Insulation shell for DN20 type VBG6-063GI-20  
Pliers for Kv disks VBG6-091SOS  

Actuators

Image Description Product Type Downloads
Actuator 24Vac, on/off control; with cable 1m MR6-24-2POS  
Actuator 24Vac, modulating control 0/2..10V or 0/4..20mA; with cable 1m MR6-24-010