Product Description
Mechanical disconnectors of this type are suitable for the protection of drinking water systems as required by EN 1717 "The technical regulation of drinking water systems". Their purpose is to protect systems against back pressure, back flow and back syphonage of non-potable water into the public water supply network. Mechanical disconnectors of this type can be used to provide protection up to and including liquid category 4 (toxic, very toxic, carcinogenic and radioactive substances). The changeover from shutoff to flow positions can be by means of an hydraulic or electrical/electronic actuator.
Technical Properties
Media |
Cold drinking water |
Liquid category (EN1717) |
class 4 |
DN size |
32 mm |
Port connection |
internal threads |
Port diameter |
Rp 1 1/4 inch |
Mounting position |
horizontal |
Minimum inlet pressure |
1,5 bar |
Nominal pressure |
PN10 |
Max. media temperature |
40 oC |
Flow capacity Kvs |
13 |
Body material |
red bronze RG5 |
Spring bonnet material |
synthetic material |
Power supply |
230V 50Hz |
Additional Descriptions |
- Optimal protection of the drinking water supply system
- Enhanced protection against back pressure, back flow and back syphonage into the water supply network
- Shut-off condition visually indicated on the spring bonnet
- Compact construction
- Standardised discharge connection
- All materials are KTW approved
- Low pressure loss
|
Set pressure |
0,5 bar |
Maximum inlet pressure |
10 bar |