Skip Ribbon Commands
Skip to main content



The V5004T Kombi-QM is a Pressure Independent Control Valve (PICV). It combines a flow controller and a full stroke...

Product Description

The V5004T Kombi-QM is a Pressure Independent Control Valve (PICV).

It combines a flow controller and a full stroke, full authority temperature controller in one valve. Equipped with an actuator Kombi-QM provides a full stroke modulating temperature control. It is suitable for use in variable and constant flow systems. They may be used as constant flow limiter in constant flow systems (without an actuator) or as a Pressure Independent Control Valve in variable flow systems. V5004T Kombi-QM is typically used for balancing and temperature control of fan coil units, air handling units, chilled ceilings and one-pipe heating systems. 

Technical Properties

Medium type water or water-glycol mixture according to VDI 2035
Delta-P 50 ... 400 kPa
DN size 150 mm
Minimum flow 15000 l/h
Port connection flanges
Maximum flow (qs) 150000 l/h
Connection of accessories side connections
Max. delta P 400 kPa
Pre-setting Yes
Media temp. -10 ... 120 oC

Valve housing made of dezincification-resistant brass; Sealings made of EPDM; SafeConTM pressure test valves made of brass; Handwheel with scale and Cover cap made of plastic 

Place in installation return
Valve Control function Pressure Independent PICV
Automatic balancing support Yes
  • Automatic balancing of differential pressure
  • Precise pressure independent flow performance
  • Highest energy saving potential due to efficient energy transfer and minimised pump speed
  • Integrated measuring possibility to find the optimal setpoint for the pump
  • Reduced movements of actuators as pressure fluctuation do not influence the required temperature
  • No complex calculation needed for selection
  • No balancing method needed for commissioning
  • Wide range of application
  • Sizes DN15 up to DN250
  • Various versions to support standard flow rates as well as low flow and high flow needs
  • Covers two functions in one valve which reduces mounting costs
  • Easy commissioning
  • Presetting with visual flow scale at the valve
  • Presetting by hand without the need of tools
  • Presetting possible even when the system is running and an actuator is already mounted
  • Can balance a system even if only some parts of a building are in operation
  • Maintenance friendly
  • Emergency shut-off function with plastic cap not for permanent use
  • Measuring possibility for problematic applications
More Information
Max. operating pressure 16 bar