Product Description
The FK76CS filter combinations comprise reverse rinsing filter and pressure reducing valve in one appliance.
They ensure a continuous supply of filtered water. The fine filter stops the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probablity of corrosion. The pressure reducing valve prevents pressure damage and reduces water consumption. All individuals units correspond to the requirements of current DIN/DVG specifications. Technical features of each unit also apply to the combination assembly.
Technical Properties
| Approvals |
- DVGW (mesh size 100 micron)
|
| Media |
Drinking water |
| DN size |
25 mm |
| Port connection |
external threads |
| Port diameter |
1 inch |
| Mounting position |
horizontal or vertical |
| Outlet pressure |
1.5 ... 6 bar |
| Max. media temperature |
40 oC |
| Flow capacity Kvs |
6.2 |
| Body material |
red bronze RG5 |
| Spring bonnet material |
synthetic material |
| Filter mesh |
100 micron |
| Transparant strainer chamber |
Yes |
| Setpoint scale |
Yes |
| Balanced seat design |
Yes |
| Filter type |
reverse rinsing |
| Reverse rinsing with filtered water |
Yes |
| Additional Descriptions |
- Double Spin Technology -Cartridge with external rotor enabling simultaneous cleaning in lower and upper filter areas -Visual function check possible
- Balanced seat valve
- Filtered water supplied even during reverse rinsing
- Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water
- Memory ring indicates when next manual reverse rinsing is due
- Automatic reverse rinsing actuator with bayonet connector can be retrofitted
- Shock resistant clear synthetic material filter bowl enables easy checking of filter contamination
- Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
- Valve and filter inserts fully interchangeable
- Large filter surface
- Filter and complete filter bowl are replaceable
- Standardised discharge connection
- All materials are KTW approved
- Approved by TUEV LGA for low noise, Group 1 without limitations
|
| Maximum inlet pressure |
16 bar |
