Skip Ribbon Commands
Skip to main content
​This extension for Google Chrome will allow you to click on the links in the PDF CAD files and open the related documents from your browser.

Braukmann High pressure reducing valve with balanced seat and set point scale, D06FH

Braukmann High pressure reducing valve with balanced seat and set point scale, D06FH

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for...

Product Description

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.

Technical Properties

Medium type drinking water
Connection Inlet/Outlet conn. set, ext. thread
Outlet pressure 1.5 ... 12 bar
Max. operating temp. 60C (70C with max. press. 10bar)
Body material brass, dezincification resistant
Spring bonnet material synthetic material
Filter mesh 0.16 mm
Filter bowl brass
Balanced seat design Yes
Additional Descriptions
  • Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
  • Up to size 1 1/4" approved by LGA for low noise, Group 1 without limitations
  • The valve insert is of high quality synthetic material and can be fully exchanged
  • The outlet pressure is set by turning the adjustment knob
  • The set pressure is directly indicated on the set point scale
  • The adjustment spring is not in contact with the drinking water
  • Integral fine filter
  • Easily retrofittable to convert valve to a reverse-rinsing filter combination
  • Can be retrofitted with an inlet check valve
  • Also available without fittings
  • All materials are UBA conform
  • All materials are ACS approved
Maximum inlet pressure 25 bar
Preset Outlet Pressure 5 bar
Minimum pressure drop 1 bar

Related Material

Products

Product Type DN size
Port diameter
Flow capacity Kvs
With threaded male connections, brass filter bowl

D06FH-1/2B
15 mm 1/2 inch 2.4

D06FH-3/4B
20 mm 3/4 inch 3.1

D06FH-1B
25 mm 1 inch 7.6

D06FH-11/4B
32 mm 1 1/4 inch 9.1

D06FH-11/2B
40 mm 1 1/2 inch 12.6

D06FH-2B
50 mm 2 inch 12

Accessories and replacement parts

Accessories

Image Description Product Type Downloads
Connection set with threaded connections for connection size 1 1/4" VST06-11/4A  
Connection set with threaded connections for connection size 1/2" VST06-1/2A  
Connection set with threaded connections for connection size 1 1/2" VST06-11/2A  
Connection set with threaded connections for connection size 2" VST06-2A  
Connection set with threaded connections for connection size 3/4" VST06-3/4A  
Connection set with threaded connections for connection size 1" VST06-1A  
Connection set with solder connections for connection size 1/2" VST06-1/2B  
Connection set with solder connections for connection size 1 1/4" VST06-11/4B  
Connection set with solder connections for connection size 1 1/2" VST06-11/2B  
Connection set with solder connections for connection size 2" VST06-2B  
Connection set with solder connections for connection size 3/4" VST06-3/4B  
Connection set with solder connections for connection size 1" VST06-1B  
Pressure gauge with housing diameter 63 mm, rear connection thread G 1/4, range 0 - 4 bar M07M-A4  
Pressure gauge with housing diameter 63 mm, rear connection thread G 1/4, range 0 - 10 bar M07M-A10  
Pressure gauge with housing diameter 63 mm, rear connection thread G 1/4, range 0 - 16 bar M07M-A16  
Pressure gauge with housing diameter 63 mm, rear connection thread G 1/4, range 0 - 25 bar M07M-A25  
Double ring wrench for removal of spring bonnet and filter bowl ZR06K  

Spare Parts

Image Description Product Type Downloads
Replacement filter insert for sizes 1"+ 1 1/4" ES06F-1A  
Replacement filter insert for sizes 1/2"+ 3/4" ES06F-1/2A  
Replacement filter insert for sizes 1 1/2"+ 2" ES06F-11/2A  
Union seal washer(10 pieces), 1/2" 0901443  
Union seal washer(10 pieces), 3/4" 0901444  
Union seal washer(10 pieces), 1" 0901445  
Union seal washer(10 pieces), 1 1/4" 0901446  
Union seal washer(10 pieces), 1 1/2" 0901447  
Valve insert complete (without filter) for sizes 1/2"+ 3/4" D06FA-1/2  
Valve insert complete (without filter) for sizes 1"+ 1 1/4" D06FA-1A  
Valve insert complete (without filter) for sizes 1 1/2"+ 2" D06FA-11/2  
Union seal washer(10 pieces), 2" 0901448  
Blanking Plug set with 0-ring (5 pieces) for sizes 1/2" - 2" S06K-1/4  
O-ring set (10 pcs.) 1/2" + 3/4" 0901246  
O-ring set (10 pcs.) 1 1/2" + 2" 0901248  
O-ring set (10 pcs.) 1" + 1 1/4" 0901247  
Brass filter bowl with O-ring for sizes 1/2"+ 3/4" SM06T-1/2  
Brass filter bowl with O-ring for sizes 1"+ 1 1/4" SM06T-1A  
Brass filter bowl with O-ring for sizes 1 1/2"+ 2" SM06T-11/2