Skip Ribbon Commands
Skip to main content
​This extension for Google Chrome will allow you to click on the links in the PDF CAD files and open the related documents from your browser.

Series TMV - TEV with interchangeable orifice, external pressure equalisation and solder x solder connections

Series TMV - TEV with interchangeable orifice, external pressure equalisation and solder x solder connections

Series TMV Thermostatic Expansion Valves with interchangeable orifice cartridge and adjustable superheat setting

Product Description

Series TMV Thermostatic Expansion Valves with interchangeable orifice cartridge and adjustable superheat setting
Thermostatic expansion valve for use in general refrigeration and original equipment. Plants with one or more circuits, refrigerated cabinets even with cramped mounting conditions, deep-freezing plants, ice and cream machines, milk cooling units, water chillers, vehicle air conditioning systems, cold stores, air conditioning systems.
  • External pressure equalization: for optimum evaporator utilization in any application, imperative for multiple injection by liquid distributors
  • Extreme durability thanks to welded stainless steel head and stainless steel diaphragm
  • Suitable for systems with hot gas defrosting
  • For maximum pressure PS see specification sheet
  • For maximum test pressure PF see specification sheet
  • Special versions (bypass, other refrigerants, etc.) on request
  • For capacities of orifices download attached engineering manual or check with our selection software Valve Tool

Technical Properties

Series TMV
Orifice interchangeable
Connections flare x flare
Pressure equalizer external
Superheat setting adjustable
Balanced port no
Capillary tube length 1.5 m
Bulb diameter 12 mm
Brass parts body
Stainless steel parts internals, thermal head
Copper parts connection tubes, bulb
Max. ambient temperature 100 oC
Max. bulb temperature 140 oC
Thermal charge Adsorber charge with damping characteristic for stable superheat control - only one valve necessary for the whole evaporating temperature range - the advantage with the combi adsorber charge is that for each of the following refrigerant groups only one valve is required:
  • R134a, R401A, R12
  • R22, R407A, R407C, R422D
  • R404A, R402A, R407B, R502, R507A
  • R410A
Technical literature Download PDF with Series number in Table

Products

Product Type Press equal
R 12
R 22
R 134a
R 401A
R 402A
R 404A
R 407A
R 407B
R 407C
R 422D
R 502
R 507A
Evaporating temp.
Inlet UNF
Outlet UNF
Stat s.ht
Ch.
Adsorber charge without MOP

_TMVX
- - - - - - - - - - - - ... oC

TMVX-00116
7/16"UNF - - - - - - - - - - - 15 ... -30 oC 5/8" 3/4" 3.25 K A
Combi adsorber charge without MOP

TMVX-00105
7/16"UNF - - - - - - - - - 15 ... -30 oC 5/8" 3/4" 3.25 K A

TMVX-00101
7/16"UNF - - - - - - - - 15 ... -45 oC 5/8" 3/4" 3.25 K A

TMVX-00108
7/16"UNF - - - - - - - 0 ... -50 oC 5/8" 3/4" 3.25 K A

TMVX-00112
7/16"UNF - - - - - - - 15 ... -30 oC 5/8" 3/4" 3.25 K A
Combi adsorber charge with pressure limiting performance (MOP) at +15C

TMVX-00107
7/16"UNF - - - - - - - - - 5 ... -30 oC 5/8" 3/4" 3.25 K A

TMVX-00104
7/16"UNF - - - - - - - - 5 ... -45 oC 5/8" 3/4" 3.25 K A
Combi adsorber charge with pressure limiting performance (MOP) at 0C

TMVX-00111
7/16"UNF - - - - - - - -10 ... -50 oC 5/8" 3/4" 3.25 K A
Combi adsorber charge with pressure limiting performance (MOP) at -10C

TMVX-00110
7/16"UNF - - - - - - - -20 ... -50 oC 5/8" 3/4" 3.25 K A
Combi adsorber charge with pressure limiting performance (MOP) at -18C

TMVX-00102
7/16"UNF - - - - - - - - -27 ... -45 oC 5/8" 3/4" 3.25 K A

TMVX-00109
7/16"UNF - - - - - - - -27 ... -50 oC 5/8" 3/4" 3.25 K A

Accessories and replacement parts

Bulb clamps

Image Description Product Type Downloads
Bulb clamp for all TEV with bulb diameter 12 mm, length 120 mm (10 pieces) ZE-00048  

Bulb clip, for all TEV with bulb diameter 12 mm (TLK, TMV, TLE(X) 0.5 - 4.5)

Image Description Product Type Downloads
Bulb clip, at suction tube diameter 8 mm (10 pieces) ZE-00040  
Bulb clip, at suction tube diameter 10 mm (10 pieces) ZE-00049  
Bulb clip, at suction tube diameter 12 mm (10 pieces) ZE-00046  
Bulb clip, at suction tube diameter 16 mm (10 pieces) ZE-00045  
Bulb clip, at suction tube diameter 18 mm (10 pieces) ZE-00044  
Bulb clip, at suction tube diameter 22 mm (10 pieces) ZE-00043  
Bulb clip, at suction tube diameter 28 mm (10 pieces) ZE-00042  

Strainer inserts for expansion valves

Image Description Product Type Downloads
Srainer insert for orifice cartridge TMV(X), TMV(X)BL, TMVL(X) (10 pieces) ZE-00010  

Gaskets, Accessories solenoid valves

Image Description Product Type Downloads
Copper gasket for seal cap series TMV, TMVL, TMX and TLE(X) deep freeze application (20 pieces) ZE-00017  

Screws

Image Description Product Type Downloads
Seal cap for TMV, TMVL and TMX (10 pieces) ZE-00014  

Pressed flare nuts

Image Description Product Type Downloads
Pressed flare nuts. Thread 7/16" for tube diameter 6mm or 1/4" (10 pieces) ZE-00050  
Pressed flare nuts. Thread 5/8" for tube diameter 6mm or 1/4" (10 pieces) ZE-00051  
Pressed flare nuts. Thread 5/8" for tube diameter 10mm or 3/8" (10 pieces) ZE-00053  
Pressed flare nuts. Thread 3/4" for tube diameter 12mm (10 pieces) ZE-00055  
Pressed flare nuts. Thread 3/4" for tube diameter 1/2" (10 pieces) ZE-00056  
Pressed flare nuts. Thread 7/8" for tube diameter 1/2" (10 pieces) ZE-00058  
Pressed flare nuts. Thread 7/8" for tube diameter 16mm or 5/8" (10 pieces) ZE-00060  

Solder adapter for inlet connection valve series AMV/TMV

Image Description Product Type Downloads
Solder adapter for pipe 6mm ODF, body 5/8" UNF ZE-00001  
Solder adapter for pipe 1/4" ODF, body 5/8" UNF ZE-00002  
Solder adapter for pipe 10mm ODF, body 5/8" UNF ZE-00003  
Solder adapter for pipe 3/8" ODF, body 5/8" UNF ZE-00004  

Pressure equaliser lines made of copper, external diameter 3 mm, internal diameter 1.25 mm DAL - copper tube, copper f

Image Description Product Type Downloads
Pressure equaliser line DAL 0.6m (10 pieces) ZE-00029  
Pressure equaliser line DAL 1.0m (10 pieces) ZE-00028  
Pressure equaliser line DAL 1.5m (10 pieces) ZE-00027  
Pressure equaliser line DALS 2.0m (5 pieces) ZE-00036  
Pressure equaliser line DAL 3.0m (5 pieces) ZE-00034  

Pressure equaliser lines made of copper, external diameter 3 mm, internal diameter 1.25 mm DALS - copper tube, copper

Image Description Product Type Downloads
Pressure equaliser line DALS 0.6m (10 pieces) ZE-00026  
Pressure equaliser line DALS 1.0m (10 pieces) ZE-00025  
Pressure equaliser line DALS 1.5m (10 pieces) ZE-00024  
Pressure equaliser line DALS 2.0m (5 pieces) ZE-00031  
Pressure equaliser line DALS 3.0m (5 pieces) ZE-00030  

Pressure equaliser lines made of copper, external diameter 3 mm, internal diameter 1.25 mm DALD - copper tube, brass f

Image Description Product Type Downloads
Pressure equaliser line DALD 0.6m (10 pieces) ZE-00064  
Pressure equaliser line DALD 1.5m (10 pieces) ZE-00065  
Pressure equaliser line DALD 3.0m (5 pieces) ZE-00066