Combination water supply unit, HS10S

Print Page

Product Description
Technical Properties

Product Description

HS10S combination water supply units integrate a check valve with test point, reverse rinsing fine filter, pressure reducing valve and shutoff valve in one appliance. They ensure a continuous supply of filtered water. The fine filter prevents the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion. The check valve protects the mains water system against back pressure, back flow and back syphonage of health threatening liquids. The pressure reducing valve prevents overpressure damage and reduces water consumption. All individual units correspond to the requirements of current DIN/DVGW specifications. Technical features of each unit also apply to the combination assembly.

Technical Properties

Approvals	DVGW (filter mesh size 100 micron) SVGW(filter mesh size 100 micron)
Media	Drinking water
Port connection	external threads
Mounting position	horizontal
Outlet pressure	1.5 ... 6 bar
Body material	brass, dezincification resistant
Spring bonnet material	synthetic material
Filter mesh	100 micron
Setpoint scale	Yes
Balanced seat design	Yes
Filter type	reverse rinsing
Reverse rinsing with filtered water	Yes
Integrated non-return device	Yes
Additional Descriptions	Double Spin Technology for connection sizes 1/2" to 11/4" -Cartridge with external rotor enabling simultaneous cleaning in lower and upper filter areas -Visual function check possible Especially compact because pressure reducing valve, fine filter, check valve and shutoff valve are combined in one unit Filtered water supplied even during reverse rinsing Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water Automatic reverse rinsing actuator with bayonet connector can be retrofitted Shock resistant clear synthetic material filter bowl enables easy checking of filter contamination Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure Filter and complete filter bowl are replaceable The valve insert is of high quality synthetic material and can be fully exchanged All materials are ACS approved All materials are KTW approved Approved by TUEV LGA for low noise, Group 1 without limitations

Certifications and Awards

Download All

Products

Product Type	DN size	Port diameter	Max. media temperature	Flow capacity Kvs	Transparant strainer chamber	Maximum inlet pressure
Threaded male connections, filter mesh size 100 micron
HS10S-1/2AA	15 mm	1/2 inch	40 ^oC	2.7		16 bar
HS10S-3/4AA	20 mm	3/4 inch	40 ^oC	3.2		16 bar
HS10S-1AA	25 mm	1 inch	40 ^oC	7.6		16 bar
HS10S-11/4AA	32 mm	1 1/4 inch	40 ^oC	8.9		16 bar
HS10S-11/2AA	40 mm	1 1/2 inch	40 ^oC	12.6		16 bar
HS10S-2AA	50 mm	2 inch	40 ^oC	13		16 bar
Red bronze filter bowl, threaded male connections, filter mesh size 100 micron
HS10S-1/2AAM	15 mm	1/2 inch	70 ^oC	2.7	-	25 bar
HS10S-3/4AAM	20 mm	3/4 inch	70 ^oC	3.2	-	25 bar
HS10S-1AAM	25 mm	1 inch	70 ^oC	7.6	-	25 bar
HS10S-11/4AAM	32 mm	1 1/4 inch	70 ^oC	8.9	-	25 bar
HS10S-11/2AAM	40 mm	1 1/2 inch	70 ^oC	12.6	-	25 bar
HS10S-2AAM	50 mm	2 inch	70 ^oC	13	-	25 bar

Accessories and replacement parts

Accessories

Image	Description	Product Type	Downloads
	Differential pressure switch for sizes R 1/2 + R 3/4	DDS76-1/2
	Differential pressure switch for sizes R 1 1/2 + R 2	DDS76-11/2
	Differential pressure switch for sizes DN65/80/100	DDS76-1
	Double ring wrench for removing the filter bowl (no fig.) for sizes 1 1/2" - 2"	ZR10K-11/2
	Double ring wrench for removing the filter bowl (no fig.) for sizes 1" - 1 1/4"	ZR10K-1
	Double ring wrench for removing the filter bowl for sizes 1/2" + 3/4"	ZR10K-1/2
	Automatic reverse rinsing actuator for automatic filter cleaning at presettable intervals, 230 V, 50/60 Hz, 10 W, with moulded Schuko electrical plug	Z11S-A
	Automatic reverse rinsing actuator for automatic filter cleaning at presettable intervals, 24 V, 50/60 Hz, 10 W, without electrical plug	Z11S-B
	Connection set with solder connections for size 1/2"	VST06-1/2B
	Connection set with solder connections for size 1 1/4"	VST06-11/4B
	Connection set with solder connections for size 1 1/2"	VST06-11/2B
	Connection set with solder connections for size 2"	VST06-2B
	Connection set with solder connections for size 3/4"	VST06-3/4B
	Connection set with solder connections for size 1"	VST06-1B

Spare Parts

Image	Description	Product Type	Downloads
	Air bleed valve	2421100
	Shut-off valve 1/2"	2192900
	Spring bonnet complete with setting scale for sizes 1/2"- 1"	0901515
	Spring bonnet complete with setting scale for sizes 1" + 1 1/4"	0901516
	Spring bonnet complete 1 1/2" + 2"	0901518
	Union seal washer (10 pcs.) for size 3/4"	0901444
	Union seal washer (10 pcs.) for size 1"	0901445
	Union seal washer (10 pcs.) for size 1 1/4"	0901446
	Union seal washer(10 pieces), 1 1/2"	0901447
	Union seal washer(10 pieces), 2"	0901448
	Check valve cartridge 1"	2164400
	Check valve cartridge 1 1/4"	2164500
	Check valve cartridge 1 1/2"	2164600
	Check valve cartridge 2"	2164700
	Check valve insert for safety valves 1/2"	2166200
	Check valve insert for safety valves 3/4"	2110200
	Shut-off valve 3/4"	2193100
	Shut-off valve 1"	2193200
	Shut-off valve 11/4"	2193300
	Shut-off valve 11/2"	2193400
	Shut-off valve 2"	2193500
	O-ring set (10 pcs.) for sizes 1/2" + 1 1/4"	0900747
	O-ring set (10 pcs.) for sizes 1 1/2" + 2"	0900748
	Spring for sizes 3/4" - 1 1/4"	2074900
	Spring for sizes 1 1/2" - 2"	2159400
	Pressure gauge with housing diameter 50 mm, connection thread G 1/4, 0 - 25 bar	M38K-A25
	Pressure gauge with housing diameter 50 mm, connection thread G 1/4, 0 - 16 bar	M38K-A16
	Pressure gauge with housing diameter 50 mm, connection thread G 1/4, 0 - 10 bar	M38K-A10
	Valve insert complete /without filter) for sizes 1/2" + 3/4"	D06FA-1/2
	Valve insert complete (without filter) for sizes 1" + 1 1/4"	D06FA-1A
	Valve insert complete (without filter) for sizes 1 1/2" + 2"	D06FA-11/2
	Filter insert complete, filter mesh size 100 micron, for sizes 1/2" - 3/4"	AF11S-1/2A
	Filter insert complete, filter mesh size 100 micron, for sizes 1" - 1 1/4"	AF11S-1A
	Filter insert complete, filter mesh size 100 micron, for sizes 1 1/2" - 2"	AF11S-11/2A
	Filter insert complete for filters with Double Spin Technology, filter mesh size 100 micron, for sizes 1/2" - 3/4"	AF11DS-1/2A
	Filter insert complete for filters with Double Spin Technology, filter mesh size 100 micron, for sizes 1" - 1 1/4"	AF11DS-1A
	Clear filter bowl for sizes 1/2" - 1 1/4"	KF11S-1A
	Clear filter bowl for sizes 1 1/2" - 2"	KF11S-11/2A
	Red-bronze filter bowl for sizes 1/2" - 1 1/4"	FT09RS-1A
	Red-bronze filter bowl for sizes 1/2" - 2"	FT09RS-11/2A
	Ball valve complete for sizes 1/2" - 2"	KH11S-1A
	Drain connector for sizes 1/2" - 2"	AA76-1/2A
	Double ring wrench for removing the filter bowl (no fig.) for sizes 1/2" - 3/4"	ZR10K-3/4
	Double ring wrench for removing the filter bowl (no fig.) for sizes 1" - 1 1/4"	ZR10K-1
	Double ring wrench for removing the filter bowl (no fig.) for sizes 1 1/2" - 2"	ZR10K-11/2