Honeywell Metering Software
Many Honeywell meters offer configuration options which are set by using a software tool and an interface. Some meters require setup, for example when used in an M-Bus network.
On this site you find the following information:
A table to help you select the right configuration software tool when accessing a meter directly, i.e. when accessing the meter over its integrated optical interface
A table to help you select the right configuration software tool for M-Bus and RF network configuration and remote access to meters
Configuration Software for Direct Meter Access
The following table shows software required for configuration directly at the meter. Apart from the software package – which can be downloaded free of charge – a BT optical interface is required (order number EWA3001799) and the PC consequently must have Bluetooth capability
The table is sorted by application and within the application by Series.
How to determine to which Series an OS Number belongs?
The Series is the same as the first four or five numerals or characters of the OS Number. Examples:
M-Bus module for EW110 Series
Pulse out module for EW110 Series
F type: RF
M type: M-Bus
A type: no communication
M-Bus module for EW171 Series
Pulse out module for EW171 Series
Note: with EW773 and EW545 Series 2nd generation and EW500 some functions are protected and require a USB dongle to be accessible. The dongle allows access to the meter in “expert” mode. A configuration table showing which functions can be changed in standard and which can be changed in expert mode is in the download area.
Configuration Software for Network Masters and Remote Meter Access
The following table shows software required for configuration of M-Bus master units and remote configuration of meters. Apart from the software package - which can be downloaded free of charge - further hardware is required: